Lids, Sleeves & Cup Parts

Paper Cups with Lids

The most common ordering mistake in this whole catalogue is buying cups first and lids second.

Rim diameters are not standardised across manufacturers, so a lid bought separately may simply not fit, whatever the box says.

Get a quote WhatsApp us

Cut to your own product, not a stock size
Board, print and finish confirmed in writing
Delivered across the UK on national carriers

Short enquiry

Quote for This Product

Tell us the quantity and any date you are working to. We reply with the board, print and finish, plus the minimum order quantity and lead time.

Design Your Own

Design Your Paper Cups With Lids

Pick a colour, put your name on it, and see how the idea reads before you ask anyone for a price. It is a sketch rather than a manufacturing proof — the real shape is cut from the product you already serve.

Sleeve colour

Name on the pack

Finish

Show a repeating pattern

A printed sleeve brands a plain cup you already buy, which is why a single site usually reaches for one before it reaches for a printed cup.

Carry this into the full designer

The full page adds the size, board, print and quantity, then sends the whole specification over in one go. Nothing is committed to at any point.

Getting Cups and Lids Right First Time

Decide Whether You Need Lids at All
Eat-in service often does not. Every lid line is stock, storage and a service decision.
Choose the Lid Type Before the Cup Size
A domed lid adds usable volume above the rim; a flat lid takes it away.
Check Which Sizes Can Share a Rim
One lid across two cup sizes halves your lid lines and removes a service error.
Order Both Together
Matching afterwards means accepting a loose fit or replacing stock.

The individual lid formats are covered on the lid types and what each suits.

Lids Are a Service Decision as Well as a Product

Every lid on a counter is a moment of staff time and a chance to grab the wrong one. Sites that reduce from four lid lines to two usually report faster service, not just lower stock.

Sharing a rim across sizes is the simplest way to get there.

Ordering, Artwork and Delivery

Getting a Quote

Tell us the volume you pour and whether you need matching lids. We reply with a written specification, the minimum order quantity and the lead time for your job.

Artwork

Cup blanks are a curved fan, so we supply a template to design on. Full file requirements are set out in our artwork guidelines.

Turnaround

Lead times depend on the print method, run length and press schedule, so we confirm yours on the quote rather than publishing a single figure.

Delivery in the UK

Orders are dispatched on national carriers to any UK address. Seedelivery information for how dates are given.

Paper Cups With Lids: Common Questions

Can we reduce the number of lid lines we hold?

Often, by choosing cup sizes that share a rim diameter. An 8oz and a 12oz frequently can, which takes two lid lines down to one.

Do all cups need lids?

Eat-in service usually does not, and every lid line adds stock and a service step. It is worth checking how many of your drinks actually leave the building.

How do we reduce the number of lid lines?

Choose cup sizes that share a rim diameter. An 8oz and a 12oz frequently can, taking two lines down to one.

Which do we choose first, cup or lid?

The lid, because it decides how much of the cup you can fill. A domed lid adds capacity; a flat one caps it.

Can we match lids to existing cups?

In most cases, as long as the rim falls on a diameter we hold. A sample cup settles it faster than a measurement does.

Why does a lid fit one 12oz cup and not another?

Because the stated volume says nothing about the rim. A few millimetres is enough for a lid to sit loose.

Do vented lids help?

On drinks carried a long way, yes. Venting releases steam that would otherwise condense inside the lid.

Should lids be ordered in equal quantity?

Only if every drink gets one. Tell us the ratio you actually use rather than defaulting to one for one.

Can lids be printed?

They can, though it is rarely worth it. A hand and a mouth cover most of the surface in use.

Can we add a size later?

Yes, and if it shares a rim with an existing size you may keep the same lid, which is worth checking before choosing.

Prefer to Talk It Through?

Sizing questions are usually quicker on the phone, especially if you have the product in front of you.

+44 7458 651107 info@conesleeves.co.uk